In order to make your projector lamp reach the maximum length in life span there are few tips that you should know as a user.
In order to correctly manipulate the projector lamp you need a piece of textile cloth or a pair of textile gloves. The lamp must never be touched with the fingers so it is always wise to manipulate the lamps components using a pair of textile gloves. The prints that remain on the glass of the lamp can cause the rising of the temperature in those areas and on the long term can significantly reduce the duration of the lamps functioning.
Another preventive measure is clearing the projectors filters. The dirty filters are blocking the air flow and cause the overheating of the lamp reducing the functioning period. In case of a replacement using the warranty certificate, the producer will test the lamp to see if the damage has occurred due to the overheating from filter clogging. If the test proves that that was the case the warranty is annulled. That is why it is very important to let the airflow around the projector as free as possible.
If you wish to introduce a new bulb in the existing lighting module of the lamp, make sure that the terminals are very tightly closed because the ceramic block can crack and that may cause ruptures that are reducing considerably the electronic isolation of the lamp.
On the other hand, if the terminals are loose the risk of an electric arc to be produced is very high and this will cause the malfunction of the lamps source of power or even of the lamp itself.
Always use the remote control when stopping the projector. If you unplug the device without stopping it first the projector will invariably enter the cooling mode when the image is stopped and the fan will accelerate the cooling of the lamp in a controlled mode. The temperature of the lamp during operating mode is 1,000 C. Unplugging the lamp without letting it first passing through the off mode will cause the unequal cooling of the lamps glass which can cause the cracking of the glass and the premature malfunction of the lamp.
More Information:
Categories
